Radioelektronikos terminų žodynas. – Vilnius : BĮ UAB „Litimo“. Kazimieras Gaivenis, Gytis Juška, Vidas Kalesinskas. 2000.
Signal-to-interference ratio — The signal to interference ratio (S/I or SIR), also known as the carrier to interference ratio ( C/I , CIR), is the quotient between the average received modulated carrier power S or C and the average received co channel interference power I ,… … Wikipedia
Signal-to-noise ratio — For signal to noise ratio in statistics, see Cohen s d. Signal to noise ratio (often abbreviated SNR or S/N) is a measure used in science and engineering that compares the level of a desired signal to the level of background noise. It is defined… … Wikipedia
Radio-frequency identification — (RFID) is a technology that uses radio waves to transfer data from an electronic tag, called RFID tag or label, attached to an object, through a reader for the purpose of identifying and tracking the object. Some RFID tags can be read from… … Wikipedia
rapport signal/brouillage en radiofréquence — aukštadažnio signalo ir trukdžių santykis statusas T sritis radioelektronika atitikmenys: angl. radio frequency signal to interference ratio vok. Hochfrequenzstörabstand, m rus. отношение сигнал/помеха на радиочастоте, n pranc. rapport… … Radioelektronikos terminų žodynas
Radio jamming — is the (usually deliberate) transmission of radio signals that disrupt communications by decreasing the signal to noise ratio. Unintentional jamming occurs when an operator transmits on a busy frequency without checking that it is in use first,… … Wikipedia
Frequency modulation — See also: Amplitude modulation In telecommunications, frequency modulation (FM) conveys information over a carrier wave by varying its frequency (contrast this with amplitude modulation, in which the amplitude of the carrier is varied while its… … Wikipedia
Radio-controlled model — A radio controlled model (or RC model) is a model that is steerable with the use of radio control. All types of vehicles imaginable have had RC systems installed in them, including cars, boats, planes, and even helicopters and scale railway… … Wikipedia
Signal noise — In science, and especially in physics and telecommunication, noise is fluctuations in and the addition of external factors to the stream of target information ( signal ) being received at a detector. In communications, it may be deliberate as for … Wikipedia
Co-channel interference — or CCI is crosstalk from two different radio transmitters using the same frequency. There can be several causes of co channel radio interference; four examples are listed here. Cellular Mobile Networks: In cellular mobile communication (GSM LTE… … Wikipedia
Noise (radio) — In radio reception, noise is the superposition of white noise (also called static ) and other disturbing influences on the signal, caused either by thermal noise and other electronic noise from receiver input circuits or by interference from… … Wikipedia
